Questions? Call us:
023 811 12681EN
Break down design barriers and grow your business with manufacturing available for you. Create and adapt.
Get Instant Quote Upload your CAD files and receive your custom CNC machining quote. Choose from a variety of materials to suit your needs.
CNC Machining
Nylon 6 is a widely used engineering thermoplastic known for its high toughness and strength. Through our UK CNC machining service, Nylon 6 CNC parts can be produced as one-off prototypes or repeat batches. Stock is typically supplied in ivory / black.
It provides good damping and high shock resistance, even when dry and at low temperatures, along with good resistance to wear and chemicals. Typical uses include transportation parts, electrical components and bushings & wear pads. Its quoted tensile strength of around 79.1 MPa gives a useful guide when sizing parts.
Parts are CNC milled or turned and available in ivory or black. Upload your CAD file for a quick quote on CNC machining Nylon 6, with delivery anywhere in the UK. Finish options (as machined) can be confirmed when you order. Every order is checked against your drawing before dispatch.
Material
Nylon 6
Description
Strengths
Lead time 10 business days. Strong, tough and wear-resistant with good chemical resistance and damping.
Weaknesses
Absorbs moisture
Ivory / black
Ultimate tensile strength
79.1 MPa
Yield strength
63.8 MPa
Modulus of elasticity
1.97 GPa
Elongation at break
200–300%
Density
1.084 g/cm³
Hardness
18.1 HV
Melting point
220°C
UK equivalent
Maximum service temperature
130°C
Thermal expansion coefficient
91.8 × 10⁻⁶ /°C
Thermal conductivity
0.306 W/(m·°C)
Electrical insulation
Good
Post-processing
Deburring / bead blasting
Recommended finish
As machined
Transportation parts
Electrical components
Bushings & wear pads
Gears & rollers
Values shown are typical supplier figures for Nylon 6 and may vary with stock condition. Please confirm critical properties before production.
Yes. Nylon 6 is strong, tough and wear resistant and machines well. It absorbs moisture, which can slightly change its dimensions over time.
Plastics are softer and expand more with heat than metals, so very tight tolerances and thin walls need extra care. Achievable tolerances depend on part size, geometry and features, so mark any critical tolerances on a 2D drawing with your upload and they will be reviewed and confirmed in your quote.
Nylon 6 is usually supplied as machined, deburred or bead blasted.
Typical uses include transportation parts, electrical components, bushings and wear pads, and gears and rollers.
Nylon 6 is tougher and more impact resistant, but it absorbs moisture. POM-C is more dimensionally stable, with lower friction, and is often preferred for precision gears and bearings.
The typical lead time shown for Nylon 6 is 10 business days from an approved order. Quantity, finishing and any heat treatment can affect this, and your quote confirms the date before you order.
Parts in as fast as 10 business days
Get Instant Quote
Subscribe for workflow updates and insights.
Review our privacy policy for details.
.jpeg)
.jpeg)
