.webp)
Upload your CAD files, Receive your customized custom Selective Laser Sintering (SLS) printing quote. Choose from a variety of process materials to suit your needs.
Selective laser sintering (SLS) uses a laser as the power source to sinter powdered material, aiming the laser automatically at points in space defined by a 3D model, binding the material together to create a solid structure.
Upload custom models for functional. high-performing 3D pieces. Take the guesswork out of manufacturing development with 3D printed prototypes for meetings, testings and perfection of final parts.
Ready-to-manufacture 3D prints with one step production from raw material to final part.
high strength, high elongation at break, high impact resistance
high strength & stiffness applications, skin contact applications, thin features and interlocking parts
PA11 is a biocompatible nylon material that is durable and flexible, making it optimal for use in exterior medical applications. Our PA11 is printed using SLS technology, which uses a laser to sinter nylon powder into plastic layer by layer. It is tensile, durable, and impact-resistant with high elongation at break. PA11 is offered in a natural white finish.
A supported wall is connected at least on two sides of the wall, while an unsupported wall is connected only on one side of the wall.
Walls that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wall geometry of the model.
Please consider the size of your model and reinforce the walls or add support structures as needed as minimum guidelines will not always be adequate for large models.
A wire is a circular, rectangular or even triangular feature that is thinner in its unconnected directions than its length. A supported wire is connected at least on two sides of the model, while an unsupported wire is connected on one side of the model.
Wires that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wire geometry of the model.
Please consider the size of your model and reinforce the wires or add support structures as needed as minimum guidelines will not always be adequate for large models.
For text, the ratio between width and depth, should be 1:1 and sans-serif fonts are preferred for line weight consistency.
.svg)
Escape holes are necessary to empty the support material of a hollow model. Two escape holes at the opposite ends of the model is optimal for the support removal process.
Please consider the size of your model and make the escape holes bigger or add more escape holes as needed as minimum guidelines will not always be adequate for large models.
A single escape hole at the end of a cavity will not allow material in the corners near the escape hole to fully escape. So we recommend multiple escape holes at both ends of the cavity.
Clearance is the space between two individual parts in a model.
If the space among the individual parts do not meet the minimum clearance, then parts can fuse together or can be difficult to clean.
This is important for movable pieces like hinges, gears, etc.
Sprues are wires that keep two or more parts together. Parts should be connected with a minimum of two sprues each. Please consider the size of your sprues and increase them as needed as minimum guidelines will not always be adequate for large models.
If the sprues are within the guidelines and are broken, but there is no damage to your model, we will still ship them as is.
The bounding box is a 3D imaginary outline of a box that encloses the smallest area occupied by your model.
Your model must be within the minimum and maximum bounding box sizes. If the size of the model is close to the maximum bounding box, then the printing orientation will be restricted.
For example: a product with dimensions of 50 x 50 x 100 mm can be 0.3 mm bigger or smaller in any direction.
Parts in as Fast from 5 business days
Versatile Plastic fis a durable nylon plastic that can be used for a wide range of applications, both for prototyping and for end products. Printed using Selective Laser Sintering (SLS), when thin, it’s flexible enough for hinges and springs and when thick, it’s strong enough for structural components. Try the Premium finish for a higher quality look and feel.
A supported wall is connected at least on two sides of the wall, while an unsupported wall is connected only on one side of the wall.
Walls that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wall geometry of the model.
Please consider the size of your model and reinforce the walls or add support structures as needed as minimum guidelines will not always be adequate for large models.
A wire is a circular, rectangular or even triangular feature that is thinner in its unconnected directions than its length. A supported wire is connected at least on two sides of the model, while an unsupported wire is connected on one side of the model.
Wires that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wire geometry of the model.
Please consider the size of your model and reinforce the wires or add support structures as needed as minimum guidelines will not always be adequate for large models.
For text, the ratio between width and depth, should be 1:1 and sans-serif fonts are preferred for line weight consistency.
Escape holes are necessary to empty the support material of a hollow model. Two escape holes at the opposite ends of the model is optimal for the support removal process.
Please consider the size of your model and make the escape holes bigger or add more escape holes as needed as minimum guidelines will not always be adequate for large models.
A single escape hole at the end of a cavity will not allow material in the corners near the escape hole to fully escape. So we recommend multiple escape holes at both ends of the cavity.
Clearance is the space between two individual parts in a model.
If the space among the individual parts do not meet the minimum clearance, then parts can fuse together or can be difficult to clean.
This is important for movable pieces like hinges, gears, etc.
Sprues are wires that keep two or more parts together. Parts should be connected with a minimum of two sprues each. Please consider the size of your sprues and increase them as needed as minimum guidelines will not always be adequate for large models.
If the sprues are within the guidelines and are broken, but there is no damage to your model, we will still ship them as is.
The bounding box is a 3D imaginary outline of a box that encloses the smallest area occupied by your model.
Your model must be within the minimum and maximum bounding box sizes. If the size of the model is close to the maximum bounding box, then the printing orientation will be restricted.
For example: a product with dimensions of 50x50x100 mm can be 0.15 mm + 0.0015*100 mm = 0.3 mm bigger or smaller in any direction.
Parts in as Fast from 5 business days
