Questions? Call us:
023 811 12681EN
Break down design barriers and grow your business with manufacturing available for you. Create and adapt.
Get Instant Quote Upload your CAD files and receive your custom CNC machining quote. Choose from a variety of materials to suit your needs.
CNC Machining
Rubber is a highly elastic polymer that deforms easily under a small force and returns to its original shape once the load is removed. We supply Rubber CNC parts across the UK, from single prototypes to production runs.
As a fully amorphous polymer with a low glass transition temperature, it stays flexible at room temperature and below. As a result it is often specified for seals & gaskets, consumer products and medical applications. Its quoted tensile strength of around 165 MPa gives a useful guide when sizing parts.
Parts are CNC machined and supplied in black. Send us a STEP file and we will quote your Rubber CNC parts promptly, with UK-wide delivery. Finish options (as machined) can be confirmed when you order. Every order is checked against your drawing before dispatch.
Material
Rubber
Description
Strengths
Lead time 10 business days. Highly elastic and resilient, with good heat, cold and corrosion resistance.
Weaknesses
Hard to hold tight tolerances
Black
Ultimate tensile strength
165 MPa
Yield strength
145 MPa
Modulus of elasticity
Not specified
Elongation at break
5–1450%
Density
0.70–3.80 g/cm³
Hardness
Not specified
Elasticity
Highly elastic
UK equivalent
Maximum service temperature
Not specified
Thermal expansion coefficient
Not specified
Thermal conductivity
Not specified
Electrical resistivity
Not specified
Post-processing
Deburring
Recommended finish
As machined
Seals & gaskets
Consumer products
Medical applications
Vibration dampers
Values shown are typical supplier figures for Rubber and may vary with stock condition. Please confirm critical properties before production.
Rubber can be machined, but it is highly elastic, so it moves under cutting forces. Simple shapes such as seals, gaskets and pads work best.
Rubber is elastic and hard to hold to tight tolerances, so it is best for parts where small dimensional variation is acceptable. Mark any critical dimensions on a 2D drawing with your upload so they can be reviewed and confirmed in your quote.
Rubber parts are usually supplied as machined and deburred.
Typical uses include seals and gaskets, vibration dampers, consumer products and medical applications.
State the compound and hardness you need for critical parts. If the part needs to hold tight dimensions or carry loads, a harder material such as polyethylene or nylon may be more suitable.
The typical lead time shown for rubber is 10 business days from an approved order. Quantity, finishing and any heat treatment can affect this, and your quote confirms the date before you order.
Parts in as fast as 10 business days
Get Instant Quote
Subscribe for workflow updates and insights.
Review our privacy policy for details.
.jpeg)
.jpeg)
