Questions? Call us:
023 811 12681EN
Break down design barriers and grow your business with manufacturing available for you. Create and adapt.
Get Instant Quote Upload your CAD files and receive your custom CNC machining quote. Choose from a variety of materials to suit your needs.
CNC Machining
Brass C360 is the classic free-machining brass, and in the UK it is usually supplied as CZ121 (CW614N), the closest standard free-cutting grade. A small lead addition makes chips break short and clear easily, so it machines faster than almost any other metal and sets the benchmark for machinability.
It gives a bright, attractive finish straight off the machine, resists corrosion well in most everyday environments and is non-magnetic. These qualities make it ideal for precision turned parts, locks, hinges, low-friction components and hardware. It is not suited to cold forming, and welding is not recommended.
We CNC turn and mill C360 brass from round, hexagon, square and flat bar, so it is very cost-effective for fittings, inserts and decorative parts in any quantity. If your application has lead restrictions, mention this when you order. Get an instant quote for C360 brass parts, with delivery anywhere in the UK.
Material
Brass C360
Description
Strengths
Lead time 10 business days. The benchmark free-machining brass: cuts fast with short chips and a bright finish, resists corrosion well and is non-magnetic.
Weaknesses
Contains lead; poor cold forming; welding not recommended
Brass
Ultimate tensile strength
360–500 MPa
Yield strength
230–350 MPa
Modulus of elasticity
97 GPa
Elongation at break
5–20%
Density
8.47 g/cm³
Hardness
90–160 HB
Corrosion resistance
Fair to excellent
Melting point
875°C
UK equivalent
UK supply grade: CZ121 / CW614N (CuZn39Pb3, UNS C38500)
Maximum service temperature
Not specified
Thermal expansion coefficient
20.9 × 10⁻⁶ /K
Thermal conductivity
123 W/(m·K)
Electrical resistivity
6.2 μΩ·cm
Machinability
Excellent (rating 100 – the benchmark)
Joining
Soldering excellent; brazing good
High-speed turned components
Locks & hinges
Low-friction moving parts
Telecommunication hardware
Values shown are typical supplier figures for Brass C360 and may vary with stock condition. Please confirm critical properties before production.
C360 is the benchmark free-machining brass, rated 100 for machinability. It cuts fast with short chips and leaves a bright finish. The equivalent UK grade is CZ121 (CW614N).
Its excellent machinability makes it ideal for small, precise turned parts and inserts. Achievable tolerances depend on part size, geometry and features, so mark any critical tolerances on a 2D drawing with your upload and they will be reviewed and confirmed in your quote.
C360 is often left as machined or polished, and it can be plated. It solders very well and brazes well, but welding is not recommended.
Typical uses include high-speed turned components, locks and hinges, low-friction moving parts and telecommunications hardware.
Choose brass C360 for fast machining, good corrosion resistance and low friction. Choose copper C110 when electrical or thermal conductivity is the priority. Note that C360 contains lead, so check suitability for drinking water or food contact.
The typical lead time shown for brass C360 is 10 business days from an approved order. Quantity, finishing and any heat treatment can affect this, and your quote confirms the date before you order.
Parts in as fast as 10 business days
Get Instant Quote
Subscribe for workflow updates and insights.
Review our privacy policy for details.
